embroidered trucker hat

We're taking the family camping later this month and I'm super excited.  I love camping, but I do not love how greasy my hair gets while camping (bangs don't help).  I normally wouldn't mind looking abhorrent in nature, but we'll be near a quaint little town that I adore for day excursions, so appearance counts.  I discovered that a hat would help, which is something that I oddly haven't owned up to this point. 

Our old tent finally bit the dust on our last trip, so we had to buy a replacement at Cabela's.  It was there that I saw this trucker hat for the low price of $5.  But it said Cabela's, which is lame.  I didn't want a Cabela's hat, but I DID want a hat that only cost $5.  I figured I could do something with it once I got rid of the Cabela's logo.

Admittedly, ripping the old lettering from the hat would have been much faster and easier with a seam ripper.  But I don't have one of those so I just used small scissors and a lot of patience.  If I ever do this again, I need to get a seam ripper.  I think they cost a whopping $3 or so.

After all evidence of the Cabela's logo was removed, I drew a design in pencil in its place.  I kinda doodled, but I was careful to make sure the design covered all the old lettering so nothing would show through.  A floral pattern lends itself well to this, because petals and leaves can go wherever you want them to.  Whereas a rainbow would have been rather limiting, for example.

I grabbed the strongest needle I owned and just went to town in colors that looked good with my red mesh and bill.  I used all six strands of embroidery floss, hoping that would mean fewer stitches.  I gotta say hats are STRONG, and I actually broke two needles while stitching.  Just snapped in half in my fingers.  I've never had that happen to me.

Turned out pretty good!  I'm glad I did this, but it SUUUUUCKED.  I developed some hard core callouses on my fingertips getting that big ass needle through the hat.  It had a mesh backing that would often catch the needle and spring it off to the side of where I wanted.  And the seam running vertically down the center was THICK, so the going was slow and tough.  But look!  So pretty!

 Rockin' it.  Imma be the prettiest old lady at the camp ground.

Hand Embroidered Pendants

I did it again.  This is way too much fun.  Now I need to get the etsy ball rolling evidently, and pricing?  I have no idea.  What would anyone pay for one of these?  Seriously.  What would you pay?

EDIT - My etsy shop is up and I've got a few lil treasures up there for sale.  Necklaces are generally $25, earrings generally $20 (unless there are some costly semi-precious stones in the mix), and I take special orders for an additional $5.  Check me out! Owls & Octopi on etsy. 

embroidered pendant necklace

 

Admittedly, my embroidery skills are slightly less than on point, but apart from that little foible this darling necklace turned out just as I'd hoped.  A little bit grandma, a little bit spunky.  I used a vintage hankie as my fabric for this, which sounds nice ("vintage" is a good buzz word), but it also provided a simple template to follow with the needle.  I have a bunch of these hankies that are gathering dust anyway, and I liked the flower pattern on this one.  I honestly just didn't trust myself to come up with my own pattern.

This necklace was whipped up in a relative jiffy.  The needlepoint was the most time consuming part, and you're really limited there anyway because of size.  I spent about an hour sewing, and the rest took 20 minutes. 

I followed the hankie's pretty flower pattern with embroidery floss (two strands only) and cut it out in a circle shape with about 1/4-inch+ of extra fabric around the edges of the image.  

I had an antique bronze pendant circle frame that I got from the craft store, but I needed something sturdy and not too thick to wrap my fabric around.  I ended up flexing my super-resourceful muscles and used the plastic base from a reusable grocery tote.  I've used this stuff before to make brims on knit hats, and it works really well.  It's bendable but makes a good form.  I'm sure there's a product out there designed specifically for this type of purpose but this was free.

I cut the plastic stuff into a circle that fit inside the pendant with a thin gap around the edges.  That will allow the fabric to fold around and still fit within the metal frame.

Unfortunately my form is black and my fabric is white.  I didn't want the black to show through, and I also kinda wanted to give it a pincushion look.  So I used a bit of thicker white fabric to stick between the two.  I cut it slightly smaller than the plastic form.

Here's a picture of my assembly line.  I decided to try hot glue, with a Plan B of gorilla glue.  The hot glue worked, so I never had to try Plan B.  I glued the white fabric to the plastic base, then put a drop of glue on top and centered my needlepoint over it.  I flipped it over and carefully pulled it taut around the edges and glued it down.  

The hard apple cider was my helper.

Then I put a glurg of hot glue inside the metal frame and stuck the fabric circle inside. It fit perfectly and so far has stayed put just fine.

Ta-da!

Another shot for art.  Lookit the hankie I destroyed!

And the finished necklace.  I harvested the chain from an old ugly necklace, stuck a few jump rings on one end and a lobster clamp on the other.  And it's beautiful!

I can't stop!

I guess I'm addicted to embellished cardigans.  Maybe I need professional help, but I'm having too much fun.  This time I did two, but they look strikingly similar, like they could be one in the same in a certain light.  But I swear they are actually two different cardigans in two different colors.  One is for my sister, because her birthday is on Saturday.  The other is for me, because I wanted one.

This one is my sister's.  The cardigan is black, and the lace applique is gray.  Oddly, I found two very different shirts from the thrift store that both had essentially the same lace pattern cut out in the back.  It was sort of a v-shaped cut out detail just below the neckline.  One was in gray and the other in ivory.  So I bought them both, cut out the cool lace design part and tossed the rest of the shirt.  They were ugly anyway.  

As a birthday spoiler, I let my sister pick which one she wanted (she picked gray) and the color cardigan she wanted (she picked black).  Then, as in before I laid out the pieces and sewed them on.  This was a little tougher than the last ones I did, simply because the symmetry was so much more pronounced on the appliques.  If it was messed up at all, it would be easier to tell at a glance, and then (I assume) that would be all anyone would see every time the sweater is worn.  ...At least, the OCD people, myself included.

So that's my sister's birthday present above.  Pretty standard, black cardigan with a nice little gray embellishment.  Happy frickin' birthday, sister!  (I also made her some jitterbug perfume, shhh...future post, maybe)

That left the ivory lace for me.  And I had the darndest time deciding which cardigan to use.  I tried a beige, which did have a decent contrast but the cowl neckline was a challenge:

I tried an ivory cardigan, which I was expecting to look much better than this but you can hardly even see it:

I tried a nice soft blue, which also looked pretty good but also had the cowl thing going on:

And finally I tried a charcoal gray, which I decided I liked the best:

And here it is all finished.  I brought the design up a little more toward the shoulders on this one.  Again with the symmetry issues, but any inconsistencies are actually due to irregularities in the lace itself (it's not my fault, I tried you guys!!).  They don't really bother me too much, and it looks really nice on. 

painted lace earrings

Wait, you said what now?  Painted lace?  How does that even work?  Pretty well, actually.  Toss in some lovely semi-precious stones and you've got something happening here.

The trick to using lace in homemade jewelry is to stiffen the lace.  I found the best way to do this is with acrylic paint rather than fabric stiffener.  Which is nice, because the fabric stiffener route requires dyeing the lace, which is a pain in the booty.  Unless of course you already have colored lace, but I did not.  Mine was boring old white.  If you do have colored lace, use the fabric stiffener and best of luck to you.  I found it makes it too stiff, while the painted lace is firm but still has some give.

I bought a yard of lace trim applique and cut out the bits in shapes I liked.  The piece I bought had a distinct, repeating shape with kind of a fleur de lis look to it, and allowed for several different options.  I made sure to always cut out two of the same shape. 

The next step is to paint these suckers.  I used acrylic paints for this.  I didn't test out any other type of paint, but I'm assuming acrylic probably performs the best anyway.  Plus it's readily available and inexpensive.  Set up the lace on a piece of foil and paint both sides liberally, then set aside and allow to dry overnight.

I went two-tone with one of these, but otherwise stayed with a single color.  I don't think I'll use any stones on the big blue ones in the front.  The little yellow flowers to the left will be attached to the inside a silver hoop for dangle effect.

Once your lace is dry begin adding pretties.  I did several different kinds.  The image below was a light gold colored paint (you can see shiny flecks if you look close), with olive green faceted, tear-drop shaped stones attached to jump rings through the lace.  I used a fairly big gauge sewing needle to create the hole before pushing the jump ring through, so I didn't bend the lace too much.  Ear hooks were attached to the lace with pieces of chain, all in antique bronze.

In this one, the lace was cut in almost the same shape as above, but I kept some of the little eyelet features in the bottom center.  The lace was painted canary yellow.  Three mint green tear-drop shaped stones were attached through the eyelet holes.  I used larger jump rings instead of chain to attach the ear hooks.

For this one I used a different part of the lace altogether.  This is the fan-shaped bit at the bottom, painted the same light gold as the first image.  I attached the lace to the ear hooks with larger pieces of chain, and attached a faceted pink stone to the center jump ring.

This one might be my favorite.  It's the fan shape again, but with some of the side elements left on.  It's painted a bright teal green color, with a piece of antique bronze wire wrapped around two sides of the lace to create a bar across the center.  Four faceted, raspberry-colored beads are strung through the wire, and the whole thing is attached to the ear hooks with pieces of chain.

This method makes a super dangly and unique piece of jewelry that has maximum wow-factor with minimum investment.  There are no more than four stones on each earring, which would be the most costly part.  The lace can be purchased on Amazon and or at craft stores, and it's a very inexpensive way to stretch your semi-precious stone-budget, while still getting lots of color.

diy embellished cardigan...again!

It worked out so well last time I embellished my own cardigan that I decided to give it another go.  But this time all my materials came from the thrift store.  Huzzah for frugality!  I visited on a day that all apparel was 50% off, so there's another financial bonus.  This ended up costing me a whopping $8, plus several hours of labor.

The cardigan is a wonderful mustard color, which I love.  The embroidered appliques came from an unbelievably fugly camisole thingy, with sequins and brown tulle and all kinds of dreadful things.  I cut out the embroidered bits as carefully as I could and trashed the rest.  

As with the last embellished cardigan project, I laid out the appliques and pinned them into place, then started sewing.  This time I used thread that matches the cardigan, so you can see the stitching if you look closely.  Again, I used an overcast stitch, and again, I worked slowly and carefully to avoid skewing the knit fabric.  Last time I did this, there were a total of six separate applique pieces.  This time there were 24.  So it took quite a bit longer.  But worth it!

Anthro-style embellished cardigan

I adore cardigans.  I'm not exaggerating when I say my cardigan collection takes up at least half my closet.  My standard work outfit is a cute top, a pencil skirt or slacks (seasonally-dependent), flats, and a cardigan.  It's my thing.  I also love wearing pieces that not everyone else has.  When I saw the two Anthropology cardigans in the image above on pinterest (right side), I had to have them.  The trouble with pinterest is you can pin things that are no longer available and you get all excited for nothing.  The two gorgeous sweaters above are not available on the Anthropology website.

So I decided to make my own.

I got a navy blue cardigan from Target for about $20.  They make a perfect standard cardigan, by the way, I highly recommend it for the price.  But I was not about to embroider my own flowers.  I don't have that skill, and I probably would have ruined a perfectly good cardigan had I tried.  Amazon has pretty much everything, including these applique embroidered motifs in a variety of colors and designs, for about $6.  

These appliques don't have the glue backing that some patches do, so they work much better for sewing onto knit fabrics.  I'm not really sure how these are supposed to be used.  Maybe they're intended for adding flair to a t-shirt or pullover or something like that.  But that shape (and the green color) was not going to work for me, so I cut it apart and saved the leaves for another project.

I laid out the flowers in a design I liked...

...transferred to the sweater, and pinned into place.

I hand sewed them using a similar color thread (coral colored in this case) in an overcast stitch.  I would resist the temptation to use a sewing machine for this.  While it would certainly be much quicker, I just don't trust it.  Knits are too stretchy...and bouncy.  I prefer to maintain the control of a hand stitch, so you can see what's happening to the sweater with each and every pass of the needle.  I would hate to get the applique sewn into place only to find that the fabric got pulled too much in one spot and made the sweater all wonky.

I sewed on my bits of applique on Saturday night after putting the kids to bed and it took me about 2 hours, start to finish.  By Sunday morning I had a brand new cardigan that no one else in the world has.  And it cost me roughly $26.

I'm already planning my next embellished cardigan project.  I'm thinking an ivory cardigan (which I happen to already have) with neutral toned appliques.  I checked, and Amazon has some good motifs in just the right colors.

La Vie en Rose Necklace

This sweet lil piece of neck fancy has been making my eyes happy every time I see it.  The color combination, the delicate chain, and that pretty little pink rose are all just so...precious.  To look at it, you'd like that maybe I bought it for a chunk of cash-money.  'Cept I totally did not (well, the component parts, which were not much).  This pretty is handmade, sucka!

The rose bead is from the local big box retail craft store giant, and I think it's resin or something.   The turquoise beads were in my stash and I can't remember what they are but I know they're semi-precious stones and they're faceted and adorable.  Then there's a thin gauge silver chain, some silver-plated wire, and silver-plated jump rings and lobster clasp.

The turquoise beads are secured individually on the wire, and then a loop is wrapped on each side.  You end up with a bead with two little closed hoops on the ends.  These are connected to each other using a jump ring, repeated until it's the length you want.  I went with ten beads for each side of the necklace.

The rose bead has a hole running length-wise, so I used one of those wires with the stopper and one end.  You could also use a length of wire and melt your own stopper using a torch.  The rose is front-heavy and the hole was slightly bigger than my stopper, so I used two cranberry-colored beads on either end to secure it.  Wrap a loop on the top, and attach it to the two lengths of turquoise beads with another jump ring.

You could certainly keep going with the beads and jump rings until it's the length you want, and then attach the lobster clasp and call it a day.  But I wanted a little variety, and I didn't want to use up all my beads on this one necklace, especially knowing that some would be hidden on the back of my neck (and likely getting caught in my hair).  So I attached a bit of thin gauge silver chain, which ends up starting just above the collar bones.  The chain is cut to the length you want (I went on the long side because that's kinda been my fancy lately), attached to the beaded sections using a jump ring, then attached to the lobster clasp with yet another jump ring.

Bingo-bango, a lovely and very feminine neck fancy.  I love how the cranberry beads just kinda peek out from behind the rose like they're shy.

Easy-peasy thread-wrapped hoop earrings

These things are so cute!  I've been getting into a jewelry making phase recently.  Well, actually I've been in an everything-but-knitting phase recently, which is probably because of the nice spring weather.  So look forward to some new posts that have nothing to do with knitting.

Starting with these little darlings.  They were super quick to put together, and they're purdy durn adorable, are they not?

For this project you will need:

• Some cheapo hoop earrings (I bought a set of three from Target for $5)
• Embroidery floss in a color of your choice
• Beads, 10
• Jump rings, 10
• Super glue
• pliers 
• sewing needle
• scissors

I wrapped the hoops in embroidery floss using a friendship-bracelet-style knot wrapping technique.  The ends are super glued in place just to keep them from slipping or coming apart.  The knots are super tight and I made sure to cover every bit of the hoop so no silver peeks through.

I already had the beads and jump rings lying around in my craft supplies.  I can't remember what kind of stone the beads are, but they're a lovely mint green color in a tear drop shape that lends itself well to this type of dangle.  Once I had each bead on a jump ring, I held up the hoop to see where it would sit when worn and found the bottom-center spot.  I used a sewing needle to create a hole in the thread knot for the jump ring and inserted it through.  Then I counted three knots away and did it again, until I had two on each side of the center bead, for a total of five evenly spaced beads.

And there you go.  A nice dangly, simple yet unique jewelry piece that only took about 10 minutes to make!

Gothic Lace Composition Slouchie

Anyone who follows this blog knows that I like a good composition hat.  My fingers get bored, and knitting an entire piece in the round quickly becomes tedious and tiresome.  I need a bit more adventure in my knitting projects.  Which sounds like an odd thing to say.

I also recently bought myself a couple new books of knitting stitches, and I've been itching to try out some of the stitch patterns.  This is one of the simple ones; it's Gothic Lace, which is on the beginner end of the spectrum, and can also be found online with a chart, if that's your preference.  Increases are yarn overs, and decreases are both ssk and k2tog.  A good one to allow yourself to mildly zone out while knitting...a sitcom stitch but not a drama/suspense stitch, if you will.

This hat is made out of lovely, silky-soft Malabrigo Rios in Glazed Carrot.  I've had it in my stash for a few years and finally decided I couldn't resist any longer; I had to make something out of it for myself.  It has interesting color variations from the dyeing method, and it's just so, so pretty and soft.

The brim piece is knit straight, blocked, then wrapped around and stitched together to hold in place.  Stitches along the side are picked up and then knitted stockinette in the round for a few inches before decreasing in a star-shape.

I used size 8 circular needles, and the buttons are salvaged from a craft store bargain bin.  They don't match, but they're all about the same color.

Gothic Lace Composition Slouchie

To knit the brim:
CO 25 stitches.  Knit garter stitch for 5-6 rows and then switch to the Gothic Lake pattern described below.  I left two stitches on either end for a border; the border stitches on the left side of the RS are garter, while on the right side they're stockinette.  The garter border makes the bottom of the brim and looks a little like ribbing, while the stockinette border makes the stitches easier to pick up in the round.

Gothic Lace pattern:
Row 1:  k2, k2tog, yo, k1, *(ssk, k1, yo, k1, yo, k1, k2tog, k1) repeat*, yo, ssk, k2
Row 2 (and all even/WS rows): k2, then purl all
Row 3:  k2, k2tog, yo, k1, *(ssk, k1, yo, k1, yo, k1, k2tog, k1)*, yo, ssk, k2
Row 5:  k2, k2tog, yo, k1, *(ssk, k1, yo, k1, yo, k1, k2tog, k1)*, yo, ssk, k2
Row 7:  k2, k2tog, yo, k1, *(yo, ssk, k3, k2tog, yo, k1)*, yo, ssk, k2
Row 9:  k2, k2tog, yo, k1, *(k1, yo, ssk, k1, k2tog, yo, k2)*, yo, ssk, k2
Row 11:  k2, k2tog, yo, k1, *(k2, yo, sl1-k2tog-psso, yo, k3)*, yo, ssk, k2

k2tog = knit 2 stitches together knitwise
yo = (yarn over) wrap the working yarn around the righthand needle to create a new stitch
ssk = (slip, slip, knit) slip 1 stitch knitwise, slip, 1 stitch knitwise, then put the lefthand needle through the back loops and knit them together
sl1-k2tog-psso = slip 1 stitch knitwise, knit the next 2 stitches together, then pass the slipped stitch over

Continue in the Gothic Lace pattern until the piece measures about 22 inches, or wraps comfortably around your head with just a little stretch, and overlaps 1-2 inches or so.  The overlap creates a flap for the button detail, which makes them look more functional.  Then BO and block.

Once the piece is blocked, wrap one end over the other (RS out) with the garter stitch end overlapping the other (for the flap).  Secure it together with a few quick sewing stitches using a yarn needle (use the same yarn as your project so you can't see it).  Pick up stitches from the stockinette side.  You want to end up with 70 stitches, so you may need to increase stitches for a row in the round, depending on how many you were able to pick up.  I ended up having to make about 10 stitches, which I did by knitting in the front and back of evenly distributed stitches.

To finish the hat:
Using dpns or circular needles, knit stockinette in the round (knit all stitches) for about 3 inches before starting the decreases described below.

Decrease row 1: *k5, ssk, k2tog, k10, ssk, k2tog*
Decrease row 2 (and all even decrease rows): knit all stitches
Decrease row 3: *k4, ssk, k2tog, k8, ssk, k2tog*
Decrease row 5: *k3, ssk, k2tog, k6, ssk, k2tog*
Decrease row 7: *k2, ssk, k2tog, k4, ssk, k2tog*
Decrease row 9: *k1, ssk, k2tog, k2, ssk, k2tog*
Decrease row 11: *ssk, k2tog*
Decrease row 13: *sl1, k2tog, psso*

Once you are left with only a few stitches, cut the working yarn and thread it through the stitches left on the needles.  Pull together and thread through the center, then weave in.

The flap on the brim piece now needs some buttons.  I did four in a similar color, and placed them evenly down the length of the flap.  You could do a contrasting color, or several different colors if that's your fancy.  I used thick embroidery thread in orange, because my yarn needle wouldn't fit through the button holes.  The color is similar enough to my yarn color that you can't tell it's not the same.  These buttons are not functional; they're just pretty and add a bit of flair.

And now you have a unique slouchie hat that was super fun to make!  Enjoy!

Thumbie Gauntlets

I made these gauntlets a few months ago and have been wearing them almost religiously since the weather started getting colder in the mornings.  You may be able to see that in the pictures; the wool is starting to gather some pills here and there, like any well-loved knitted piece.  They are extremely comfortable, and the stitch makes them thick and fluffy.  Lately I've been wearing them over my sleeves for extra protection from the wind.  Cuz damn it's cold out there.

These are very simple to make; the hardest part is staying focused on the stitch pattern.  Because it's two repeats rather than one, you can tune out easily and forget whether the row was supposed to start with a purl or a knit.

The thumb is nothing fancy; it's created by picking up stitches after the piece is completed.  They almost look like they're giving you a thumbs up when not being worn.  These could certainly be made longer or shorter, depending on your preference, but I like where they hit me right in the center of my forearm.  They slide on easily and stay put.

I used Shepherd's Wool, an aran spun wool (17 sts = 4 inches) and size 8 circular needles.  You will also need size 7 circs or dpns to complete the thumbs.

Thumbie Gauntlets
CO 38 st and join in the round, being careful not to twist the work.  To avoid weaving in the tail, knit it into the first row (optional, but it's nice).
Work 1x ribbing (k1, p1*) for 8 rows.

The pattern is a simple 4-row repeat, as follows:
Rows 1 and 2: k1, p1*
Rows 3 and 4: p1, k1*

Work the pattern for 52 rows (13 pattern repeats) in the round, then on row 53 continue the pattern working flat (not continuing in the round).  Knit flat for 12 rows (3 pattern repeats).  For these rows, as you would no longer be knitting in the round, the odd rows (WS) of the pattern become reversed.

After the 65th row (13th after beginning flat knitting), rejoin in the round for row 66 and continue in pattern for an additional 8 rows.

Work 1x ribbing (k1, p1*) for 6 more rows, then BO loosely in pattern.

Using size 7 needles, pick up 14 stitches at the hole created by the straight knitted rows (7 on each side), and join in the round.  Work 8 rows of 1x ribbing (k1, p1*), and BO loosely in pattern.

Weave in the ends.  Repeat for the other gauntlet.